Mipa 2K matt clearcoats

Matt surfaces are now standard for many vehicle manufacturers. However, repairing matt finishes poses special requirements. MIPA offers various matt clearcoats for perfect results.

Mipa 2K-HS-Klarlack CCD

Matt, more matt, CCD

Mipa 2K-HS-Klarlack CCD with a gloss level of 5-10 gloss units at a 60°-angle is a new VOC-compliant, High-Solid acrylic clearcoat for very matt dull coatings (complete and partial paintworks) in the car sector.
It ensures a uniform dull matt clear coat on solvent and water-based paints. Mipa 2K-HS-Klarlack CCD is highly resistant to all weather conditions as well as to chemical agents and mechanical stress.

  • dull matt
  • gloss level 5-10
  • for high-quality matt coatings
  • or for adjusting the gloss levels of Mipa 2K-HS-Klarlacke CC 4, CC 6, CC 7, CC 8 and CC 9
  • hardener: Mipa 2K-MS-Härter and Mipa 2K-HS-Härter

item no. 26001 0000

Mipa 2K-HS-Klarlack matt CCM

Individual gloss in HS

This clearcoat with a gloss between 15-20 gloss units at a 60°-angle is a VOC-compliant High-Solid acrylic clearcoat to create high-quality matt coatings (partial or complete paintwork) on cars. It is also appropriate to adjust the gloss of Mipa 2K-HS-Klarlacke and of Mipa 2K-HS-Express-Klarlack CX 2. It guarantees a uniformly matted clear coating on solvent-based and water-based basecoats. Mipa 2K-HS-Klarlack matt CCM provides high resistance to all kind of weathering as well as to chemical and mechanical stresses.

  • gloss level 15-20
  • for high-quality matt coatings
  • or for adjusting the gloss levels of Mipa 2K-HS-Klarlacke CC 4, CC 6, CC 7, CC 8, CC 9 and CX 2
  • hardener: Mipa 2K-MS-Härter and Mipa 2K-HS-Härter

item no. 23391 0000

Mipa 2K-Klarlack matt CM

Individual gloss in MS

Two-component, acrylic-based clearcoat with a gloss level of 15-20 gloss units at a 60°-angle. Medium-Solid quality, good resistances, uniformly matted surfaces. Appropriate to finish matt, satin matt and satin gloss metallic and effect coatings. For use on plastic parts e.g. bumpers, just add the additive Mipa 2K-Elastic.

  • gloss level 15-20
  • for high-quality matt coatings
  • can be used as matt finish or as additive for Mipa 2K-Klarlacke for satin matt or satin gloss coatings
  • Mixing ratio: 2:1
  • Hardener: Mipa 2K-MS-Härter
item no. 23290 0000 (6 x 0,5 l)
23295 0000 (2 x 5 l)

Mipa 2K-Klarlack CPE

Fantastic - elastic

Elastic, satin gloss 2K-MS-Klarlack to recoat especially basecoats on plastic substrates. Excellent resistance to weathering and yellowing. High mechanical and chemical resistance. The gloss level corresponds to common, reduced-gloss plastic coatings.

  • satin gloss
  • mixing ratio: 2:1
  • hardener: Mipa 2K-MS-Härter

item no. 23221 0000

Mipa 2K-Klarlack CMS

...and the problem is solved!

High-quality matt clearcoat with fine texture. Particularly suitable to apply some Peugeot and Citroen standard colours, which are available in a matt fine texture. Excellent resistance to environmental conditions and weathering, resistant to yellowing and very scratch-resistant.

  • mixing ratio: 2: 1
  • hardener: Mipa 2K-MS-Härter

item no. 26011 0000