Mipa Clean-Free – Clean-free aerosol filling
The Mipa Clean-Free adapter and the Clean-Free filling caps turn our aerosol filling device D-2014 into a clean-free filling device.
- Compatible with Mipa Aerosol-Abfüllgerät D-2014
- Environmentally friendly due to reusable caps and lids
- Caps and lids are made of recyclable plastic
- Multiple fillings in the same colour shade without changing the cap and lid are possible
- Caps and lids are available separately
- Saves time and money and protects the environment
Mipa Spot-Sealer-Spray
Mipa Spot-Sealer-Spray has been especially developed for small sanded-through areas in spot repairs. The low-build, glazing application and very smooth flow do not require any further intermediate sanding. Mipa Spot-Sealer-Spray can be overcoated directly wet-on-wet with basecoats and provides very high corrosion protection despite low dry film thickness.
Mipa Reflektor-Spray
transparent / grey (by daylight)Mipa Reflektor-Spray is a marking spray that, thanks to its special pigmentation, guarantees excellent light reflection in the dark. Surfaces coated with Mipa Reflektor-Spray reflect incident light extremely effective and this way the surfaces “light up". The effect is comparable to e.g. traffic signs that reflect the car headlights at night. Mipa Reflektor-Spray is suitable for both interior and exterior use.
Mipa Abbeizer-Spray
whitish, milkyMipa Abbeizer-Spray is a sprayable paint stripper without CFC, NMP and aromatics for removing old varnish and paint layers based on oil, nitro, dispersion or synthetic resin as well as old 1K and 2K paintworks from all common substrates like stone, wood and metal. In addition, Mipa Abbeizer-Spray can also be used on following plastic substrates without etching them: POM, PVC, PC and PP-EPDM.
Mipa 1K-UV-Füller-Spray
greyHigh-quality, UV-drying filler for fast and economic refinishing, which can be sanded after only 5 minutes of radiation with an UV LED lamp or mercury vapour lamp. Thus, significant savings can be realised by eliminating heating-related costs. After curing, the filler surfaces are very resistant to mechanical stress and chemical agents. Particularly suitable for partial car coatings and spot repairs. Very good adhesion on steel, iron, aluminium and galvanized substrates. In addition, it offers direct adhesion on the following plastic substrates: PU, ABS, PVC, PC and PS.